|
| Catalogue |
Our latest catalogue will be sent to you, quickly and without any cost after your online request.
|
|
|
|
|
Job-specific products
|
 Download our catalogue with Job-specific products
Aluminium hygienic ladder
For the food and social services. Strong, profiled anti-skid rungs that are welded to the stiles on all sides. Stiles with wear-resistant anti-skid feet.
Ladder width: 400mm
Rung distance: 280mm
Mobile mast ladder with integrated fall arrest
The all-terrain ladder foot that compensates all surface irregularities automatically, is anchored to the
aluminium ladder parts with snap closures. Fixing the ladder part to the mast is done with tension straps
with rattle. The tension strap and hooks can be fixed to the ladder part easily and quickly. The pull
device alleviates the up and downward transportation of the ladder parts. From the moment, he fixes the
first ladder part, the mechanic is fully protected against falling by a safety harness with fall arrester.
Ladder width: 370 mm
Material: bare aluminium
Safety harness is not included
Mast hanging ladder
Stable construction with steel hanging hooks, galvanised Ø 320 mm and karabiners.
Aluminium platform (collapsible)
Stable construction equipped with anti-skid bulb plate. Feet are collapsible and have wear-resistant, plastic feet. Voeten zijn
inklapbaar en voorzien van slijtvaste kunststof schoenen.
Aluminium platform (collapsible)
4-section platform, stable construction, covered with aluminium bubble plate, strong, automatic steel hinges, beleg uit
aluminium traanplaat, sterke stalen automatische scharnieren, carrier handles.
Aluminium platform (telescopic)
Telescopic parts 2-sectioned, stable construction, made entirely of aluminium bubble plate, smooth extension.
Aluminium support stand, height adjustable
Stable aluminium construction, smooth adjusting from approx. 700 through 1000 mm, strong blocking through traction on both
adjustable feet, fix with sloping angle to both parts. Levelling feet have adjusting screws, exchangeabe wear-resistant
pine finish 1000 x 60 x 25 mm .
Aluminium support stand, height adjustable
Stable aluminium construction, smooth adjusting from approx. 700 through 1000 mm, strong blocking through traction on both
adjustable feet, fix with sloping angle to both parts. Levelling feet have adjusting screws, exchangeabe wear-resistant
pine finish 1000 x 60 x 25 mm .
Roof ladders
Suitable for all kinds of roofing and roof inclinations up tot 60°. Stiles are made of light metal profiles. Solid, reliable
fixing of rungs to the stiles. The anti-skid rungs are heavily ribbed for greater safety.
Accessories for roof ladders:
Roof hooks for tiled roof.
Roof hooks can easily be secured to the beams; for the first ladder at leat 2 hooks are required and 1 extra for every additional ladder. Roof hooks for slate tiles are also available.
On roofs with a > 20° and < 75° angle of inclination, roof hooks, in accordance with DIN EN 517, should be applied. These should be spread over the roofing as follows:
- Upper most rows < 1,00 m below the edge of the roof.
- The in-between rows each time < 5,0 m distance from the row below
- The bottom rows < 1,50 m above the roof-gutter, always measured from the angle of inclination
- The horizontal distance between the hooks may not be over 2,00 m
Should be used when dealing with climbing heights of more than 3,00 m
Attachment clamp
For fixing and securing roof ladder to the lower roof hooks, in accordance with DIN 18160/5.
Work platform
800 x 250 mm, including frame, for simple and quick assembly (assembly manual enclosed).
|
|
|
